Fencing in Roseville, CA

Wood Fencing

Cedar and redwood hold up well in the Sacramento Valley climate because of their natural resistance to moisture and insects. Pressure treated posts are the right choice for ground contact regardless of the fence boards used above.

We set posts in concrete at the correct depth for the fence height and the soil conditions at your property. A post set too shallow in expanding clay will push out of the ground over time. A post set without concrete in sandy soil will shift. We set them correctly because we stand behind the work.

Vinyl Fencing

Vinyl fencing requires no painting, holds its color, and does not rot. It costs more than wood upfront but requires significantly less maintenance over its life. For HOA neighborhoods that require white or almond fencing and want to avoid the annual maintenance cycle, vinyl is often the right answer.

Ornamental Iron

Ornamental iron fencing gives a front yard a finished, permanent look and works well where you want a boundary without blocking the view. Powder coat finish protects against rust. We handle custom heights, styles, and gate configurations. Ornamental iron is also a good choice for pool enclosures where code requires a specific barrier style.

Setting Posts Correctly

Post depth should be one-third the total post length in the ground, with a minimum of two feet for a standard six-foot privacy fence. Posts are set in concrete that extends above the soil line and is crowned to shed water away from the wood.

On sloped yards, fence lines can step down with the grade or be racked to follow it continuously. The right choice depends on the fence style and the look you want. We talk through the options at the estimate.

Property Lines, Permits, and HOA

Property lines are the homeowner's responsibility to know before we start. We do not survey or determine property boundaries. If you are not sure where your line is, get a survey or check your title documents before we show up.

Permit requirements vary by city. Most jurisdictions require a permit for fences over a certain height. HOA approval is required in most newer Placer County neighborhoods before materials are ordered. We will tell you at the walkthrough what is likely to need submitting.

Areas We Serve for Fencing

• Fencing in Roseville, CA
• Fencing in Rocklin, CA
• Fencing in Lincoln, CA
• Fencing in Loomis, CA
• Fencing in Granite Bay, CA
• Fencing in Auburn, CA
• Fencing in Citrus Heights, CA
• Fencing in Antelope, CA
• Fencing in Orangevale, CA
• Fencing in Fair Oaks, CA
• Fencing in Folsom, CA
• Fencing in Sacramento, CA

Frequently Asked Questions

What fence material holds up best in Roseville's climate?

Cedar or redwood boards hold up well in the Sacramento Valley. Vinyl is fully maintenance free and holds color. Pressure treated posts are the right choice for the ground contact portion regardless of the fence boards used above.

How deep do you set posts?

One-third the total post length in the ground, minimum two feet, set in concrete. For a six-foot fence with an eight-foot post, that is two to two and a half feet of post in the ground.

Do I need a permit for a fence?

Most cities require a permit for fences over a certain height, typically six feet. We pull what is required and factor the processing time into the project schedule.

How long does fence installation take?

A standard residential yard typically runs one to two days. Larger commercial projects or projects with significant grade change take longer.

Free Fencing Estimates in Roseville

We serve Placer and Sacramento County. Call or fill out the form for a free written estimate.